December 8, 2015
If you want to know how we fit our worktops, here's a step by step guide from a recent job in South Milford. Once the worktops are in place and levelled we start to fit them together. We only use 2 part epoxy resin which is colour coded to the worktop. The joints are scored to give extra bond, we then masking tape up the joint to stop the glue getting on the worktops. Once the glue is applied to both tops it is cleaned off with a flat packer. When the glue is set we scrape off any excess that may still be there. The sink is bonded with silicone and then back filled once in place and cleaned off. All worktops are also siliconed to the units too. Once all fitting is complete we clean worktops with lithofin easy clean.
This is the end result, classic and elegant quartz worktops that look stunning in any kitchen!